Still in quarantine over here… all bars are shut down, so I made my own! Here’s how..
Grab the materials listed below:
Cascade iron co brackets (2-3 depending on length of wood)
level
drill
hammer
black paint
paintbrush
wood (2 x 12)
styling pieces!
Step 1: Hand Lettering on Wall
My sister is a hand letter! We uploaded her lettering to a computer, hooked it up to a projector, and went over it with black exterior paint!
Step 2: level holes
we used this level to level the top holes of the bracket (if you don’t your drinks may slip off). We used concrete anchor screws. Linked HERE.
step 3: hang brackets
We got these cascade iron co brackets for 20 each!! We decided to make the top holes about 41 inches from the ground so the top bracket was 42 inches - standard bar height. That way bar height stools would fit!! Make sure the holes are level so your drinks won’t fall off the bar!!
Step 4: place wood
We get a 2 by 12 pieced of wood. We trimmed it to fit the wall. We placed the brackets 10 inches in from the end of wall. If you have a longer area to work with you may need an additional bracket to support the wood! See Cascade Iron Co website for specifics!
Step 5: Style & Enjoy!
